Racks & Cabinets

SPEC SHEET This Cable Radius Drop allows cables to exit from the side of a ladder runway. The toolless snap-in design is easy to install and confor...

SPEC SHEET The Ceiling Mount Kit is used to suspend ladder runs from the ceiling and includes 2 ceiling brackets, 2 slip-on brackets, 8 bolts, and ...

SPEC SHEET This support bracket kit is used to mount cable ladder runways to the floor and consists of 2 floor mount brackets plus a straight splic...

SPEC SHEET This set of 2 Ladder End Caps provide a finished look to the end of a ladder runway and protect technicians from accidental cuts and scr...

SPEC SHEET This Stand-Off Elevation Kit supports a ladder run above a cabinet or rack and is made of heavy duty steel to support the weight of a lo...

SPEC SHEET The Stand-Off Support Kit allows the attachment of ladder runway 12"" directly above an existing ladder runway, in either a parallel or ...

SPEC SHEET The Vertical Wall Bracket Kit is used to secure a vertical ladder run flush to the wall. Kit includes 2 wall brackets High strength ste...

SPEC SHEET Support a 5" fiber tray run above a row of cabinets using this standoff kit. Support brackets can be positioned anywhere along a straigh...

SPEC SHEET Support both a 5" or 10" fiber cable tray and up to an 12" wide wire basket tray with this single standoff support kit. Easily mounts to...

SPEC SHEET Support both a 5", 10", or 15" fiber cable tray and up to an 18" wide wire basket tray with this single standoff support kit. Easily mou...

SPEC SHEET Support both a 5", 10", or 15" fiber cable tray and up to an 18" wide wire basket tray with this single standoff support kit. Easily mou...

SPEC SHEET Bag of 50 thumb screws for fiber cable tray assembly.

SPEC SHEET Bag of 50 square nuts for fiber cable tray assembly.

SPEC SHEET Bag of 50 T-bolts for fiber cable tray assembly.

SPEC SHEET Bag of 50 hex nuts for fiber cable tray assembly.

SPEC SHEET Hose Brackets secure the Flexible Hose to the Spill Over in a vertical drop from an overhead fiber tray run to a cabinet or rack below. ...

CLICK FOR SPEC Features: Standard 19" rack mount. 0.06" thick aluminum construction. Is easily customized in the field. Natural aluminum finish. T...

CLICK FOR SPEC Features: Standard 19" rack mount. 0.06" thick aluminum construction. Is easily customized in the field. Natural aluminum finish. T...

SPEC SHEET The Rack Isolation Kit, isolates open frame racks from conductive flooring to prevent multiple ground paths. Features: Universal design...

SPEC SHEET The Rack Isolation Kit, isolates open frame racks from conductive flooring to prevent multiple ground paths. Features: Universal design...

SPEC SHEET Suspend a fiber tray run from the ceiling with this trapeze support kit. Includes 2 pcs of threaded rod and all hardware required for in...

SPEC SHEET Connects to a 5" straight channel section to create a 45 degree upward angle from a horizontal run. Use with VCT-120DE41 45 degree down ...

SPEC SHEET Connects to a 5" straight channel section to create a 45-degree downward angle from a horizontal run. Use with VCT-120UE41 45 degree up ...

SPEC SHEET Connects to a 5" straight channel section or other transitional fittings to provide a 90-degree horizontal bend in a fiber routing syste...