Cable Runway Systems

SPEC SHEET Suspend a fiber tray run from the ceiling with this trapeze support kit. Includes 2 pcs of threaded rod and all hardware required for in...

SPEC SHEET Suspend a fiber tray run from the ceiling with this trapeze support kit. Includes 2 pcs of threaded rod and all hardware required for in...

SPEC SHEET Connects to a 5" straight channel section to create a 45 degree upward angle from a horizontal run. Use with VCT-120DE41 45 degree down ...

SPEC SHEET Connects to a 5" straight channel section to create a 45-degree downward angle from a horizontal run. Use with VCT-120UE41 45 degree up ...

SPEC SHEET Connects to a 5" straight channel section or other transitional fittings to provide a 90-degree horizontal bend in a fiber routing syste...

SPEC SHEET Horizontal crosses connect to four 5" straight channel sections or other transitional fittings to create a four-way intersection with tw...

SPEC SHEET Straight channel sections support and carry cables horizontally throughout a fiber cable routing system. Available in 6.5ft lengths, cha...

SPEC SHEET This Horizontal Elbow provides a 90 degree sweep in a ladder runway and conforms to minimum cable bend radius requirements. Installs eas...

SPEC SHEET The Universal Vertical Elbow provides a 90 degree bend from a horizontal run to vertical (or vice versa). Designed to comply with minimu...

SPEC SHEET The Grounding Strap Kit provides grounding across a cable ladder splice and includes 1 grounding strap and 2 hex bolts. Installation re...

SPEC SHEET This adjustable-angle Butt Splice Kit is used to connect two ladder sections end to end at any angle you need. High strength 14 gauge s...

SPEC SHEET This Cable Radius Drop allows cables to exit a ladder run internally while maintaining a proper bend radius. High strength 6063-T6 alum...

SPEC SHEET This Cable Radius Drop allows cables to exit from the side of a ladder runway. The toolless snap-in design is easy to install and confor...

SPEC SHEET The Ceiling Mount Kit is used to suspend ladder runs from the ceiling and includes 2 ceiling brackets, 2 slip-on brackets, 8 bolts, and ...

SPEC SHEET This support bracket kit is used to mount cable ladder runways to the floor and consists of 2 floor mount brackets plus a straight splic...

SPEC SHEET This set of 2 Ladder End Caps provide a finished look to the end of a ladder runway and protect technicians from accidental cuts and scr...

SPEC SHEET This Stand-Off Elevation Kit supports a ladder run above a cabinet or rack and is made of heavy duty steel to support the weight of a lo...

SPEC SHEET The Stand-Off Support Kit allows the attachment of ladder runway 12"" directly above an existing ladder runway, in either a parallel or ...

SPEC SHEET The Vertical Wall Bracket Kit is used to secure a vertical ladder run flush to the wall. Kit includes 2 wall brackets High strength ste...

SPEC SHEET Horizontal crosses connect to four 5" straight channel sections or other transitional fittings to create a four-way intersection with tw...

SPEC SHEET Connects to a 5" straight channel section or other transitional fittings to provide a 90-degree horizontal bend in a fiber routing syste...

SPEC SHEET Connects to a 5" straight channel section to create a 45-degree downward angle from a horizontal run. Use with VCT-120UE41 45 degree up ...

SPEC SHEET Connects to a 5" straight channel section to create a 45 degree upward angle from a horizontal run. Use with VCT-120DE41 45 degree down ...

SPEC SHEET Suspend a fiber tray run from the ceiling with this trapeze support kit. Includes 2 pcs of threaded rod and all hardware required for in...